Loft & Bale › Bales on a trailer
How Many Hay Bales Fit on a Trailer?
Count by space and by weight, and use the smaller. A 48 ft × 8.5 ft flatbed within a 13.5 ft height limit fits about 560 small 2-string squares by space; a 25 ft gooseneck fits about 10 5×5 rounds stacked two high. Round-bale loads you see with 30 or more bales are usually wider or taller than standard limits and run under hay-specific rules or permits.
Example loads within 8.5 ft wide and 13.5 ft high
| Bale | 48 ft semi flatbed (5 ft deck) | 25 ft gooseneck (3 ft deck) |
|---|---|---|
| Small square, 2-string (14×18×36 in) | 560 (7 high, 14 t) | 280 (9 high, 7 t) |
| Small square, 3-string (16×22×44 in) | 312 (6 high, 13.3 t) | 164 (7 high, 7 t) |
| 4×5 round (4 ft wide, 5 ft diameter) | 18 (1 high, 7.7 t) | 16 (2 high, 6.8 t) |
| 5×5 round (5 ft wide, 5 ft diameter) | 9 (1 high, 4.7 t) | 10 (2 high, 5.3 t) |
| 5×6 round (5 ft wide, 6 ft diameter) | 9 (1 high, 6.8 t) | 8 (2 high, 6 t) |
| Large square 3×4×8 ft | 24 (2 high, 13.8 t) | 12 (3 high, 6.9 t) |
Width, height and weight
Round bales are awkward: two 5-ft-wide bales side by side are 10 ft, wider than the usual 8.5 ft (102 in) limit, and double-stacking 5-ft bales on a 5 ft deck exceeds 13.5 ft. Some places allow wider or taller hay loads in season or with a permit; others do not. Check the rules where you drive. This calculator lets you set the width and height you are allowed, then counts what fits.
Loading tips
- Put heavier bales low and centred over the axles.
- Strap every row; rounds roll, so chock the first row.
- Check tyre pressure and the trailer’s plated weight before loading heavy alfalfa.
Common hay questions
How many round bales can a semi haul?
Within 8.5 ft width and 13.5 ft height, one row of 5×5 or 5×6 bales: about 9 on a 48 ft flatbed. Loads of 30–40 bales are carried two across and stacked, which needs wider or taller limits than the standard ones.
How many square bales on a semi?
By space within standard limits, about 560 small 2-string bales on a 48 ft flatbed, if the weight stays within the payload.
How we calculate: bale weights come from bale volume × a typical packed density (about 10–11 lb per cubic foot for round bales, 9–10 for small squares, 12 for large squares) unless you enter a weight. Daily hay is a share of body weight (about 2–2.5% for beef cows and horses, 3–3.5% for sheep and goats), the ranges US university extension services publish for hay-only diets. Feeding waste and storage loss are typical published ranges. Real bales and animals vary: weighing a few bales beats any table.